Mobile Cranes Get Smarter

20170620_133003It is a beautiful summers day in central London, and I have been invited to watch a Liebherr LTM 1130-5.1 all terrain crane, owned by Southern Cranes & Access place a 2t section of a new staircase inside a five-storey office building. The commercial property is undergoing major refurbishment and the staircase is one of the final elements of the job.

To undertake the project, the crane is sitting outside on the street in front of the building, its outriggers are 100% fully extended on the left-hand side, and 60% short rigged on the right. Like many city centre projects one lane of the highway must remain open throughout crane operations, meaning that full extension of the right-hand outriggers is not possible.

In the past, this would have meant operating the crane according to the predetermined load charts assuming a limited extension of the outriggers, probably 50%. But a huge disadvantage of this was that the crane lost out on capacity that it actually had, resulting from the full extension on the left.

Aware of this issue Liebherr invested in the creation of the VarioBase system seven years ago, revealing it at Bauma in 2010. This measures both the extension length and pressure in the outriggers and uses the crane rigging information inputted by the operator before calculating the actual crane capacity in real time.

“Without VarioBase we would have had to use a larger crane further down the road, which means we wouldn’t have been competitive on this job,” explains Ross Wickens, sales and technical manager for Southern Cranes, and a former crane operator himself.

The set up was further limited by the presence of basements along the road meaning that pressure could not be exerted over the pavement.

“The sensors within the outrigger talk to the computer which lets the operator know where it is, what rig is where and the pressure going through each outrigger and what the crane can do. If he tried to come this way his computer will tell him how much that outrigger is out and how much weight he can lift, as it will obviously come down as you go around the crane,” Wickens says pointing to the side where the outriggers are at 60% extension.

The 130t crane is set up with 42t of counterweight and two rope falls. “At the moment, I am at 45°,” explains the crane operator Ryan Whitfield. “It is a telescopic boom with five sections, 60m in total.”

In order to lift over the existing building the crane boom is fully extended. “I have full counterweight, yesterday I had three falls of rope and now I have two. They each have 8.4t capacity per line pull. Yesterday’s job was over 20t,” explains Whitfield.

“The sensors are automatically on. With the new computers, they acknowledge where the outriggers are so you can’t lie to it or put yourself in a position where you might make a mistake,” he says.

Improving safety was one of the reasons that Liebherr developed VarioBase, which comes as an option on its LICCON 2 operating system. The system identifies the machine’s precise centre of gravity and the tipping edges and then sets the two relative to each other. If a load is lifted over one support, the risk of tipping is lower than a lift to the side. This means that the system can allow a higher load capacity and a greater outreach. The greatest increases are in working areas above the supports when partial ballast is in use. Load capacity increase also means that sometimes full ballast is no longer needed.

“The crane control (LICCONSystem) calculates the load chart in real time, not using stored load charts,” explains Patrick Fähnle, technical trainer at Liebherr. “It is totally up to date because we have the length of the sliding beams, and the pressure of the support cylinders. It adds eight more sensors, four on each support cylinder and four to measure length. It is very safe,” he adds. The system tracks the capacity as the machine is slewing, so if lifting begins to approach the ultimate capacity, the crane will slow and cannot continue to be moved once the limit is reached. The LICCON 2 system itself was introduced in 2007, building on the success of LICCON 1. “We got to a point where the storage capacity was not enough for the new bigger cranes which have more configurations, more boom extensions, so the load chart data was growing and growing. We designed LICCON 2 with new architecture that would be suitable for the future,” says Fähnle.

Fundamentally the new LICCON 2 system combined the processing power of the PC with the screen in a single unit. “The monitor is now not only a screen, it includes the complete PC inside. Processor speed gets faster every year. We have a bigger memory card inside with much higher storage capacity than before,” he says.

Another major advantage of the LICCON 2 is that it comes with a work planner that allows operators to simulate the lift before they start work.

This was something that Southern Cranes found very useful in preparing for its confined London lift. Lifting in the city

Another company that sees the benefits of crane control systems that offer enhanced load monitoring and the ability to accurately assess true capacity under a range of outrigger scenarios is Belgium’s Sarens. In March it was announced that the firm would purchase 18 new Demag AC cranes which are fitted with the firm’s new IC-1 Plus system.

“Our IC-1 Plus system now allows outriggers to be set arbitrarily to get true configuration as your space constraints on the job site allow the extension. The system now onboard gives you charts for the capacity of the crane, for that configuration, and it is now slew angle related,” explains Ascan Klein, director, competence centre control systems at Terex Cranes.

“We monitor how the crane is set up,” he says explaining that sensors measure the outrigger position, and the amount of installed counterweight. Other data such as the boom configuration and reeving is entered by the operator. “Based on this data we have algorithms releasing the optimal capacity at the actual point of operation.” This means that the operator can optimise the crane capacity at every lifting point with arbitrary outrigger settings. Even when set on a standard outrigger base the slew angle related capacities are significantly improved compared to the classical 360° charts.

In addition the operator has a planning tool on board, which is embedded in the operator display but can also be used as a remote web based applicaton, which shows, depending on the outrigger settings, which capacity can be reached at a given point.

The seamless integration of this technology into the well-known, easy to operate IC-1 control system provides the operator continuously with an overview of the actual lifting situation and its surrounding.

So far the IC-1 Plus is available on all new AC cranes. It can also be retrofitted on to some models, but this has to be assessed on a case by case basis. Over time the firm plans to extend this across the Terex crane range.

“Customers from urban areas are excited about it. Wherever you work in confined spaces our customers really appreciate it,” says Klein.

This is certainly true for Sarens which has just purchased eight AC 100 4L cranes, seven AC 220- 5, and three AC 130-5 cranes.

Group equipment trade manager Jan L Sarens, says: “We have had a very positive experience with these cranes in the past. What we see now is that these are very operationally effective and cost efficient. Specifically, what we like about the IC1-Plus system is that it is good for city use.

“A lot of the cranes we have recently purchased are going to be used in London, so for city use it is a real big advantage because there is not always room to have outriggers fully out.”

He echoes the experience of other crane companies who find that the monitoring facility enhances capacity. “When the outriggers are out, you are not automatically downgraded to the load charts where they have 360 degree operation and that is really a very big advantage in those cases where you lose capacity compared to the full outriggers.”

The other big advantage for Sarens is safety. With over 1500 cranes in its possession including some with Liebherr’s VarioBase system this is paramount.

“The system is obviously to enhance safety. You can train people as much as you want and have much experience but in the end people can make mistakes,” he says explaining that the live load monitoring based on the actual outrigger positions prevents operator errors.

A mistake made by mobile crane operators in the past has been to assume full load capacity when one or more of the outriggers are only partially extended, manually overriding the safe working load system.

Although this was somewhat addressed under EN1300 and the removal of the override mechanism from the cabin, live load monitoring with the full range of outrigger positions is another useful step.

“When we buy a new crane now we take it as standard, VarioBase or IC-1Plus. Manufacturers offer it as an option but internally we decided to take it as standard because we see it as a safety feature,” says Sarens.

“The additional cost compared to the basic price of a crane is rather limited. We have to do it. We decided to make it default, for us it is not an option. Every system that can help the operator do his job safely is a big advantage.”

To read the rest of the piece and see more images visit Cranes Today for the full article

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s